Please use this identifier to cite or link to this item: http://hdl.handle.net/1942/11555
Title: A1N on nanocrystalline diamond piezoelectric cantilevers for sensors/actuators
Authors: MORTET, Vincent 
Soltani, Ali
Talbi, A.
POBEDINSKAS, Paulius 
HAENEN, Ken 
De Jaeger, Jean-Claude
Pernod, P.
WAGNER, Patrick 
Issue Date: 2009
Source: Brugger, J. & Briand, D. (Ed.) PROCEEDINGS OF THE EUROSENSORS XXIII CONFERENCE. p. 40-43.
Series/Report: Procedia Chemistry
Series/Report no.: 1/1
Abstract: Micro-cantilevers can be used as both sensors and actuators. In this work, the design, fabrication and characterization of piezoelectrically driven nano-crystalline diamond (NCD) cantilevers are reported Diamond films were grown on silicon (100) substrates by microwave plasma enhanced chemical vapor deposition (MW-PECVD). Cantilevers are coated by DC pulsed piezoelectric with AIN films that is sandwiched between two metallic electrodes. The thicknesses of AIN and diamond layers are 1 mu m and 700nm, respectively. The influence on the electromechanical response of cantilevers length was studied. The motion of the electrically driven cantilevers is performed by measuring the evolution of the electrical impedance at the resonant frequencies that varies between 10 kHz and 130 kHz for the resonant mode.
Document URI: http://hdl.handle.net/1942/11555
Link to publication: 10.1016/j.proche.2009.07.010
DOI: 10.1016/j.proche.2009.07.010
ISI #: 000275995600010
Category: C1
Type: Proceedings Paper
Validations: ecoom 2011
Appears in Collections:Research publications

Show full item record

SCOPUSTM   
Citations

9
checked on Sep 3, 2020

WEB OF SCIENCETM
Citations

9
checked on May 21, 2022

Page view(s)

18
checked on May 24, 2022

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.