Please use this identifier to cite or link to this item:
http://hdl.handle.net/1942/35030
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | DEFERME, Wim | |
dc.contributor.advisor | REENAERS, Dieter | |
dc.contributor.author | Nilis, Bjarne | |
dc.date.accessioned | 2021-09-13T13:02:12Z | - |
dc.date.available | 2021-09-13T13:02:12Z | - |
dc.date.issued | 2021 | |
dc.identifier.uri | http://hdl.handle.net/1942/35030 | - |
dc.description.abstract | The conventional production process of MEMS, silicon micromachining, is expensive and lengthy. Printing and coating techniques such as screen printing, inkjet printing, and blade coating could be a solution to this problem, reducing costs and turnover time. In this study, the materials and production process for a thermal actuator MEMS is selected and tested. The structure of the print is as follows: the substrate, the sacrificial layer, and the structural layer. After depositing this layer, the sacrificial material is dissolved and removed to achieve a freestanding structure. PVA, PMMA, and PEO are tested for their usability in the process as a sacrificial material. The main criterium for the sacrificial layer is that it can be dissolved after the production process with no negative impact on the MEMS. For the structural material, a silver nanoparticle and microflake ink are tested. PVA was selected as a sacrificial material because of its dissolving under 15 min. in water of 85°C. It was applied using blade coating. For the structural material, screen printing was found most suitable. Both inks are strong enough to support a freestanding actuator up to 9mm long, however, the nanoparticle ink was brittle and broke down easily. In thermoelectric testing, temperatures of 170°C were achieved for both inks which translates to simulated deflections of up to 224µm. A proof of concept achieved deflections of 100µm, however, further optimisation of the process and design is needed due to deformations that occur in the structure. | |
dc.format.mimetype | Application/pdf | |
dc.language | nl | |
dc.publisher | UHasselt | |
dc.title | A materials and methods study for the fabrication process of thermal actuator microelectromechanical systems | |
dc.type | Theses and Dissertations | |
local.bibliographicCitation.jcat | T2 | |
dc.description.notes | master in de industriële wetenschappen: energie-elektrotechniek | |
local.type.specified | Master thesis | |
item.fullcitation | Nilis, Bjarne (2021) A materials and methods study for the fabrication process of thermal actuator microelectromechanical systems. | - |
item.fulltext | With Fulltext | - |
item.contributor | Nilis, Bjarne | - |
item.accessRights | Open Access | - |
Appears in Collections: | Master theses |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
8227aa58-f852-4155-8fa7-bdb898789bbd.pdf | 4.84 MB | Adobe PDF | View/Open | |
ca2ac6a0-39e3-43d0-b593-13976bae04a3.pdf | 1.21 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.