Please use this identifier to cite or link to this item:
http://hdl.handle.net/1942/48804| Title: | Multiplexed Microfluidic-Based Sensor Using Photopolymerized Molecularly Imprinted Polymer Structures for the Detection of Estrogens in Wastewater | Authors: | TAHIR, Faran MARY JOY, Rani D'HAEN, Jan MARCHAL, Wouter POBEDINSKAS, Paulius HAENEN, Ken THOELEN, Ronald ETHIRAJAN, Anitha |
Issue Date: | 2026 | Publisher: | ACS | Source: | Acs Applied Polymer Materials, | Status: | Early view | Abstract: | Trace estrogens in water sources pose growing environmental and public health concerns due to their endocrine-disrupting properties. In this work, we propose a versatile approach using a molecularly imprinted polymer (MIP)-based highly selective and sensitive multiplexed microfluidic-based sensor for the detection of three key estrogens: estrone (E1), 17β-estradiol (E2), and estriol (E3), employing electrochemical impedance spectroscopy (EIS) as a read-out technique. The MIP sensors used to detect the different estrogens were in situ photopolymerized on the functionalized nanocrystalline diamond-coated substrates, employing N,O-bisme-thacryloyl ethanolamine (NOBE) as a bifunctional monomer/cross-linker. The versatility also arises from the minimal variation in the formulations used for MIP sensors to detect a family of estrogens, where the variation is related only to the target molecule of interest in the composition. The MIP sensors were able to detect the respective analyte with a detection limit of 0.5 nM in the buffer and in wastewater samples with high selectivity. The impedance signal after analyte addition (100 nM) reached a steady state in a short time (10 min). EIS results were also validated using complementary techniques, such as UV−vis spectroscopy for a selected high concentration (500 nM) and gas chromatography−mass spectrometry (GC−MS) for a lower concentration range (5−50 nM). The selectivity of each MIP sensor for a specific target molecule was verified by using its respective structural analogues. Additionally, the selectivity of the E2 MIP sensor was also verified by GC−MS analysis by using a solution containing a mixture of estrogens. This work highlights the synergistic advantage of combining microfluidic-assisted MIP synthesis with multiplexed impedimetric sensing, offering a robust platform for the environmental monitoring of a class of molecules in complex water matrices. | Keywords: | estrogens;molecularly imprinted polymers;microfluidics;electrochemical impedance spectroscopy;multiplexing;wastewater | Document URI: | http://hdl.handle.net/1942/48804 | ISSN: | 2637-6105 | e-ISSN: | 2637-6105 | DOI: | 10.1021/acsapm.5c04745 | ISI #: | 001714841900001 | Rights: | 2026 The Authors. Published by American Chemical Society | Category: | A1 | Type: | Journal Contribution |
| Appears in Collections: | Research publications |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| Faran_Manuscript.pdf Restricted Access | Early view | 4.22 MB | Adobe PDF | View/Open Request a copy |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.