|
| | Issue Date | Title | Contributor(s) | Type | Cat. |
| 1 | 2023 | Proposal for determination of wind action on steel rack supported warehouses during execution | GOUVEIA HENRIQUES, Jose; Marra, Antonino Maria; VAN VUGT, Glenn; Bartoli, Gianni; DEGEE, Herve | Proceedings Paper | C1 |
| 2 | 2023 | Analysis and optimization of a hybrid testing methodology using a small-scale set-up | VAN VUGT, Glenn; DEGEE, Herve; GOUVEIA HENRIQUES, Jose; VANDOREN, Bram | Conference Material | C2 |
| 3 | 2023 | Characterizing transition zone between steel‐concrete composite and reinforced concrete members | DRAGAN, Dan; DAS, Rajarshi; DEGEE, Herve | Proceedings Paper | C1 |
| 4 | 2023 | Chapter 5: Transition between composite and reinforced concrete members | DEGEE, Herve; DAS, Rajarshi | Book Section | B2 |
| 5 | 2023 | Chapter 2: Load introduction and force transfer mechanisms at steel profile-concrete interface | DEGEE, Herve; DAS, Rajarshi | Book Section | B2 |
| 6 | 2023 | Innovative One‐way Connections between I‐beams and CHS columns | DAS, Rajarshi; Kanyilmaz, Alper; Madhouni, Mouad; DEGEE, Herve | Proceedings Paper | C1 |
| 7 | 2023 | Innovative hollow section column‐splice connections resorting to laser cutting | DAS, Rajarshi; Kanyilmaz, Alper; Couchaux, Mael; DEGEE, Herve | Proceedings Paper | C1 |
| 8 | 2023 | Innovative hybrid coupled wall systems to resist seismic action – HYCAD | DAS, Rajarshi; Morelli, Francesco; Zona, Alessandro; Hoffmeister, Benno; Vulcu, Cristian; DEGEE, Herve | Proceedings Paper | C1 |
| 9 | 2023 | Hybrid Coupled Walls with Replaceable Shear Links: Technical Solution and Seismic Performance of a 3D Multi‐Story Building | Vulcu, Cristian; Hoffmeister, Benno; Bimbli, Dorina; DAS, Rajarshi; DEGEE, Herve | Proceedings Paper | C1 |
| 10 | 2023 | Experimental Validation of Finite Element Models for Open-to-CHS Column Connections | DAS, Rajarshi; Kanyilmaz, Alper; DEGEE, Herve | Journal Contribution | A2 |
| 11 | 2022 | Kinematics-based model for complete behavior of RC dapped-end connections failing along a re-entrant corner crack | RAJAPAKSE MUDIYANSELAGE, Chathura; DEGEE, Herve; Mihaylov, Boyan | Proceedings Paper | C1 |
| 12 | 2022 | Investigation of shear and flexural failures of dapped-end connections with orthogonal reinforcement | RAJAPAKSE MUDIYANSELAGE, Chathura; DEGEE, Herve; Mihaylov, Boyan | Journal Contribution | A1 |
| 13 | 2022 | Mitigation of the Seismic Impact on Storage Gas Tanks by Using Isolation System | GOUVEIA HENRIQUES, Jose; Morelli, Francesco; DEGEE, Herve | Journal Contribution | A1 |
| 14 | 2021 | Effective bending stiffness of steel-concrete composite columns with multiple encased steel profiles | Chrzanowski, M.; Odenbreit, C.; Obiala, R.; Bogdan, T.; DEGEE, Herve | Journal Contribution | A1 |
| 15 | 2021 | Efficient modeling of masonry failure using a multiscale domain activation approach | DRIESEN, Cedric; DEGEE, Herve; VANDOREN, Bram | Journal Contribution | A1 |
| 16 | 2021 | Assessment of Failure along Re-Entrant Corner Cracks in Existing RC Dapped-End Connections | RAJAPAKSE MUDIYANSELAGE, Chathura; DEGEE, Herve; Mihaylov, Boyan | Journal Contribution | A1 |
| 17 | 2021 | Numerical Analysis of the Structural Resistance and Stability of Masonry Walls with an AAC Thermal Break Layer | DEYAZADA, Mohammed; DEGEE, Herve; VANDOREN, Bram | Journal Contribution | A1 |
| 18 | 2021 | Experimental Characterization of the Initial Shear Strength of Composite Masonry including AAC Blocks and DPC Layers | VANHEUKELOM, Martijn; DAS, Rajarshi; DEGEE, Herve; VANDOREN, Bram | Journal Contribution | A1 |
| 19 | 2021 | Laser Cut passing-through Open-to-CHS Beam-to- Column Connections | DAS, Rajarshi; Kanyilmaz, Alper; DEGEE, Herve | Proceedings Paper | C1 |
| 20 | 2020 | Efficiency and accuracy of a multiscale domain activation approach for modeling masonry failure | DRIESEN, Cedric; DEGEE, Herve; VANDOREN, Bram | Proceedings Paper | C1 |
| 21 | 2020 | Seismic protection of industrial gas tanks using base isolation system | GOUVEIA HENRIQUES, Jose; Morelli, Francesco; DEGEE, Herve | Proceedings Paper | C1 |
| 22 | 2020 | Simplified Density Indexes of Walls and Tie-Columns for Confined Masonry Buildings in Seismic Zones | CAI, Gaochuang; Su, Qiwang; Tsavdaridis, Konstantinos Daniel; DEGEE, Herve | Journal Contribution | A1 |
| 23 | 2020 | Dissipative rahmentragwerke mit schlanken Querschnitten in regionen mit moderater Seismizität | DEGEE, Herve; Hoffmeister, Benno; Duchene, Yves | Journal Contribution | A1 |
| 24 | 2020 | A risk-consistent approach to determine EN1998 behaviour factors for lateral load resisting systems | Vamvatsikos, Dimitrios; Bakalis, Konstantinos; Kohrangi, Mohsen; Pyrza, Stella; Castiglioni, Carlo Andrea; Kanyilmaz, Alper; Morelli, Francesco; Stratan, Aurel; D'Aniello, Mario; Calado, Luis; Proenca, Jorge Miguel; DEGEE, Herve; Hoffmeister, Benno; Pinkawa, Marius; Thanopoulos, Pavlos; Vayas, Ioannis | Journal Contribution | A1 |
| 25 | 2020 | Laser-cut I-beam-to-CHS column moment-resisting steel joints | DAS, Rajarshi; GOUVEIA HENRIQUES, Jose; DEGEE, Herve | Journal Contribution | A1 |
| 26 | 2020 | LASTEICON OPEN-TO-CHS BEAM-TO-COLUMN CONNECTIONS | DAS, Rajarshi; GOUVEIA HENRIQUES, Jose; DEGEE, Herve | Proceedings Paper | C1 |
| 27 | 2020 | Characterization of moment resisting I-beam to circular hollow section column connections resorting to passing-through plates | DAS, Rajarshi; Kanyilmaz, Alper; Couchaux, Mael; Hoffmeister, Benno; DEGEE, Herve | Journal Contribution | A1 |
| 28 | 2020 | Design and analysis of laser-cut based moment resisting passing-through I-beam-to-CHS column joints | DAS, Rajarshi; Castiglioni, Carlo A.; Couchaux, Mael; Hoffmeister, Benno; DEGEE, Herve | Journal Contribution | A1 |
| 29 | 2020 | Characterization and optimization of a steel beam to RC wall connection for use in innovative hybrid coupled wall systems | DAS, Rajarshi; STEENSELS, Rik; DRAGAN, Dan; VANDOREN, Bram; DEGEE, Herve | Journal Contribution | A1 |
| 30 | 2020 | Earthquake resisting potential of an innovative HCW system with laser-cut open-to-CHS connections | DAS, Rajarshi; VANDOREN, Bram; DEGEE, Herve | Proceedings Paper | C1 |
| 31 | 2019 | U-shaped steel plate dissipative connection for concentrically braced frames | GOUVEIA HENRIQUES, Jose; Calado, Luis; Castiglioni, Carlo; DEGEE, Herve | Proceedings Paper | C1 |
| 32 | 2019 | Transfer of shear stresses at steel-concrete interface | Chrzanowski, M.; Odenbreit, C.; Obiala, R.; Bogdan, T.; DEGEE, Herve | Journal Contribution | A1 |
| 33 | 2019 | Characterisation of a new flat mechanical shear connection mean for steel-concrete composite columns | Odenbreit, C.; Chrzanowski, M.; Obiala, R.; Bogdan, T.; DEGEE, Herve | Journal Contribution | A1 |
| 34 | 2019 | Dissipative connections with U-shaped steel plate for braces of concentrically braced frames | GOUVEIA HENRIQUES, Jose; Calado, L.; Castiglioni, C. A.; DEGEE, Herve | Journal Contribution | A1 |
| 35 | 2019 | Experimental investigations on the resistance of masonry walls with AAC thermal break layer | DEYAZADA, Mohammed; VANDOREN, Bram; DRAGAN, Dan; DEGEE, Herve | Journal Contribution | A1 |
| 36 | 2019 | EFFECTIVE BENDING STIFFNESS OF HEAVY STEEL-CONCRETE COMPOSITE COLUMNS WITH MULTIPLE ENCASED STEEL PROFILES | Chrzanowski, Maciej; Odenbreit, Christoph; DEGEE, Herve; Obiala, Renata; Bogdan, Teodora | Proceedings Paper | C1 |
| 37 | 2019 | U-shaped steel plate dissipative connection for concentrically braced frames | GOUVEIA HENRIQUES, Jose; Calado, L.; Castiglioni, C. A.; DEGEE, Herve | Proceedings Paper | C1 |
| 38 | 2019 | Laser technology for innovative connections in steel construction: An overview of the project LASTEICON | DEGEE, Herve; Kanyilmaz, A.; Castiglioni, C.; Calado, L.; Couchaux, M.; Hoffmeister, B.; Morelli, F. | Proceedings Paper | C1 |
| 39 | 2019 | Performances of moment resisting frames with slender steel and composite sections in low and moderate seismic areas | DEGEE, Herve; Duchene, Y.; Hoffmeister, B. | Proceedings Paper | C1 |
| 40 | 2019 | Evaluation of end-zone detailing of pre-tensioned concrete girders | STEENSELS, Rik; VANDOREN, Bram; Vandewalle, Lucie; DEGEE, Herve | Journal Contribution | A1 |
| 41 | 2019 | Recommendations on end zone reinforcement detailing of pre-tensioned concrete girders | STEENSELS, Rik; VANDOREN, Bram; DEGEE, Herve; Vandewalle, Lucy | Proceedings Paper | C1 |
| 42 | 2019 | Application Centre for Concrete and Construction (ACB²) | STEENSELS, Rik; VANDOREN, Bram; DEGEE, Herve | Proceedings Paper | C1 |
| 43 | 2019 | Comparison of two different Innovative Solutions for IPE Beam to CHS Column Connections | DAS, Rajarshi; Kanyilmaz, Alper; DEGEE, Herve | Proceedings Paper | C1 |
| 44 | 2018 | RECOMMENDATIONS FOR THE DESIGN OF CBFS TAILORED TO LOW-TO-MODERATE SEISMICITY | Kanyilmaz, Alper; DEGEE, Herve; GOUVEIA HENRIQUES, Jose; Castiglioni, Carlo Andrea; Martin, Pierre Olivier | Proceedings Paper | C2 |
| 45 | 2018 | INNOVATIVE COMPOSITE COLUMNS COMPRISING THIN-WALLED COLD-FORMED STEEL PROFILES AND CONCRETE | Craveiro, Helder; GOUVEIA HENRIQUES, Jose; Simões da Silva, Luis; DEGEE, Herve | Proceedings Paper | C1 |
| 46 | 2018 | EXPERIMENTAL INVESTIGATION ON THE STRUCTURAL RESISTANCE OF MASONRY WALLS INCLUDING A THERMAL BREAK LAYER | DEYAZADA, Mohammed; VANDOREN, Bram; DEGEE, Herve | Proceedings Paper | C2 |
| 47 | 2018 | GLOBAL BEHAVIOUR OF COUPLED UNREINFORCED MASONRY REINFORCED CONCRETE WALL STRUCTURES | DEGEE, Herve; FREDERICKX, Florian; VANDOREN, Bram | Proceedings Paper | C1 |
| 48 | 2018 | The SMARTCOCO design guide for hybrid concrete-steel structures | Somja, Hugues; Hjiaj, Mohammed; Nguyen, Quang Huy; Plumier, André; DEGEE, Herve | Proceedings Paper | C1 |
| 49 | 2018 | The SMARTCOCO Project: A Research Push for Hybrid Structures | Plumier, A; DEGEE, Herve | Proceedings Paper | C1 |
| 50 | 2018 | A Design Method for Walls with Encased Steel Profiles | Plumier, André; DEGEE, Herve; DRAGAN, Dan; Huy, Nguyen Quang | Proceedings Paper | C1 |
| 51 | 2018 | An adjusted design approach for concentrically braced frames in low-to-moderate seismicity areas | Kanyilmaz, Alper; DEGEE, Herve; Castiglioni, Carlo Andrea | Journal Contribution | A1 |
| 52 | 2018 | Hysteretic behaviour of steel fibre RC coupled shear walls under cyclic loads: Experimental study and modelling | Zhao, Jun; CAI, Gaochuang; Si Larbi, Amir; Zhang, Yang; Dun, Huahua; DEGEE, Herve; VANDOREN, Bram | Journal Contribution | A1 |
| 53 | 2018 | Development of an innovative type of shear connector dedicated to fully embedded steel-concrete composite columns - experimental and numerical investigations | Chrzanowski, Maciej; Odenbreit, Christoph; Obiala, Renata; Bogdan, Teodora; Braun, Mathias; DEGEE, Herve | Proceedings Paper | C1 |
| 54 | 2018 | Experimental study of the force transfer mechanism in transition zone between composite column and reinforced concrete column | DRAGAN, Dan; Plumier, André; DEGEE, Herve | Proceedings Paper | C1 |
| 55 | 2018 | Performances of moment resisting frames with slender composite sections in low-to-moderate seismic areas | DEGEE, Herve; Duchêne, Yves; Hoffmeister, Benno | Proceedings Paper | C1 |
| 56 | 2018 | Transfer of the Longitudinal Shear at the Steel-Concrete Interface in Concrete Members Reinforced by Steel Profiles | DEGEE, Herve; DRAGAN, Dan; Bogdan, T; Plumier, A | Proceedings Paper | C1 |
| 57 | 2018 | Shear Capacity of Slabs with Voiding Elements | Molkens, T; DEGEE, Herve; DRAGAN, Dan; BAEKELAND, Pieter; Leijssen, F | Proceedings Paper | C1 |
| 58 | 2018 | An approach towards embedded structural steel connections for use in an innovative HCW system | DAS, Rajarshi; VANDOREN, Bram; DEGEE, Herve | Conference Material | C2 |
| 59 | 2018 | Characterization and Optimization of the Steel Beam to RC Wall Connection for use in Innovative Hybrid Coupled Wall Systems | DAS, Rajarshi; DEGEE, Herve | Proceedings Paper | C1 |
| 60 | 2018 | Efficient End-Zone Detailing of Pre-tensioned Concrete Elements | STEENSELS, Rik; VANDOREN, Bram; Vandewalle, Lucie; DEGEE, Herve | Proceedings Paper | C1 |
| 61 | 2018 | Optimizing the coupling ratio of seismic resistant HCW systems with shear links | DAS, Rajarshi; Zona, Alessandro; VANDOREN, Bram; DEGEE, Herve | Journal Contribution | A1 |
| 62 | 2017 | Calcul des murs et méga-poteaux mixtes acier-béton | Plumier, André; DEGEE, Herve; DRAGAN, Dan; Nguyen, Quang Huy | Journal Contribution | A2 |
| 63 | 2017 | 11.63: Seismic protection of gas tanks | GOUVEIA HENRIQUES, Jose; Morelli, Francesco; Salvatore, Walter; DEGEE, Herve | Proceedings Paper | C1 |
| 64 | 2017 | Optimal design of concentrically braced steel frames in moderate earthquake areas | DEGEE, Herve; GOUVEIA HENRIQUES, Jose; Martin, Pierre Olivier; Calderon, Iñigo; Kanyilmaz, Alper; Castiglioni, Carlo Andrea | Proceedings Paper | C1 |
| 65 | 2017 | Innovative dissipative connection for steel braced frames: U-Conneciton | GOUVEIA HENRIQUES, Jose; Calado, Luis; Castiglioni, Carlo Andrea; DEGEE, Herve | Proceedings Paper | C1 |
| 66 | 2017 | Full scale experimental assessment of concentrically braced frames designed for moderate seismicity | Kanyilmaz, Alper; Castiglioni, Carlo; DEGEE, Herve | Proceedings Paper | C2 |
| 67 | 2017 | Shear behavior of concrete walls reinforced by multiple steel profiles Calibration of numerical model | DRAGAN, Dan; Plumier, Andre; DEGEE, Herve | Journal Contribution | A2 |
| 68 | 2017 | An Analytical Design Method for Steel-Concrete Hybrid Walls | Plumier, André; DRAGAN, Dan; Nguyen, Quang Huy; DEGEE, Herve | Journal Contribution | A1 |
| 69 | 2017 | Experimental Study Regarding Shear Behavior of Concrete Walls Reinforced by Multiple Steel Profiles | DRAGAN, Dan; Plumier, Andre; DEGEE, Herve | Proceedings Paper | C1 |
| 70 | 2017 | Application of Variance Analyses Comparison in Seismic Damage Assessment of Masonry Buildings Using Three Simplified Indexes | Su, Qiwang; CAI, Gaochuang; DEGEE, Herve | Journal Contribution | A1 |
| 71 | 2017 | Influence of variability of material mechanical properties on seismic performance of steel and steel-concrete composite structures | Badalassi, Massimo; Braconi, Aurelio; Cajot, Louis-Guy; Caprili, Silvia; DEGEE, Herve; Guendel, Max; Hjiaj, Mohammed; Hoffmeister, Benno; Karamanos, Spyros A.; Salvatore, Walter; Somja, Hugues | Journal Contribution | A1 |
| 72 | 2017 | A two-stage modelling approach for the analysis of the stress distribution in anchorage zones of pre-tensioned, concrete elements | STEENSELS, Rik; Vandewalle, Lucie; VANDOREN, Bram; DEGEE, Herve | Journal Contribution | A1 |
| 73 | 2017 | Performance evaluation of an innovative HCW system with Shear Dissipative Links | DAS, Rajarshi; Zona, Alessandro; VANDOREN, Bram; DEGEE, Herve | Proceedings Paper | C1 |
| 74 | 2017 | Performance-Based Seismic Design Of An Innovative HCW System With Shear Links based on IDA | DAS, Rajarshi; Zona, Alessandro; VANDOREN, Bram; DEGEE, Herve | Proceedings Paper | C1 |
| 75 | 2016 | Aardbevingsbestendig ontwerpen van prefab betonconstructies | Molkens, Tom; DEGEE, Herve | Journal Contribution | A2 |
| 76 | 2016 | Finite element modelling of a hybrid unreinforced masonry-reinforced concrete wall | FREDERICKX, Florian; VANDOREN, Bram; DEGEE, Herve | Proceedings Paper | C1 |
| 77 | 2016 | Designing steel and composite structure in a low-to-moderate seismic area | DEGEE, Herve; Henriques, Jose; Castiglioni, Carlo; Kanyilmaz, Alper; Martin, Pierre-Olivier; Calderon, Inigo; Hoffmeister, Benno | Proceedings Paper | C1 |
| 78 | 2016 | Experimental investigations on the influence of thermal elements on the structural stability of modern masonry walls | DEYAZADA, Mohammed; VANDOREN, Bram; DEGEE, Herve | Proceedings Paper | C1 |
| 79 | 2016 | Next generation of Eurocode 8, masonry chapter | Lu, Suikai; Beyer, Katrin; Bosilijkov, Vlatko; Butenweg, Christoph; D'Ayala, Dina; DEGEE, Herve; Gams, M.; Klouda, Jaromir; Lagomarsino, Sergio; Penna, Andrea; Mojsilovic, N.; Da Porto, Francesca; Sorrentino, Luigi; Vintzileou, Elizabeth | Proceedings Paper | C1 |
| 80 | 2016 | Design of concentrically braced frames for optimized performances in moderate earthquake areas | DEGEE, Herve; Castiglioni, Carlo; Kanyilmaz, Alper; Calderon, Inigo; Martin, Pierre-Olivier | Proceedings Paper | C1 |
| 81 | 2016 | Static and dynamic response of rigid concrete pavements: parametric study | RAMAEKERS, Jeremy; Vandewalle, Lucie; DEGEE, Herve | Proceedings Paper | C1 |
| 82 | 2016 | Efficiency of seismic isolation on industrial plants – case study of a gas tank | Henriques, Jose; Morelli, Francesco; VANDOREN, Bram; Salvatore, Walter; DEGEE, Herve | Proceedings Paper | C1 |
| 83 | 2016 | Comparison of equivalent beam models and refined approaches for the modelling of masonry portal frames | MORDANT, Christophe; DEGEE, Herve; VANDOREN, Bram | Proceedings Paper | C1 |
| 84 | 2016 | Ductile design of innovative steel and concrete hybrid coupled walls | Zona, Alessandro; DEGEE, Herve; Leoni, Graziano; Dall'Asta, Andrea | Journal Contribution | A1 |
| 85 | 2016 | Shear capacity of steel fibre reinforced concrete coupling beams using conventional reinforcements | CAI, Gaochuang; Zhao, Jun; DEGEE, Herve; VANDOREN, Bram | Journal Contribution | A1 |
| 86 | 2016 | Ultimate strengths of FRC rectangular columns subjected to simulated seismic loading: Experimental database and new models | CAI, Gaochuang; DEGEE, Herve | Journal Contribution | A1 |
| 87 | 2016 | Hydration, Setting and Crack-Resistance Properties of Activated HVFACs at Early Stages | Zhao Jun; CAI, Gaochuang; DEGEE, Herve; Huang, Bo; Luo, Zhongtao | Journal Contribution | A1 |
| 88 | 2016 | Volcano-related materials in concretes: a comprehensive review | CAI, Gaochuang; Noguchi, Takafumi; DEGEE, Herve; Zhao, Jun; Kitagaki, Ryoma | Journal Contribution | A1 |
| 89 | 2015 | Scheurvorming en instabiliteit in historische metselwerkstructuren door beweging in de ondergrond | Verstrynge, Els; DEGEE, Herve; VANDOREN, Bram | Proceedings Paper | C2 |
| 90 | 2015 | An improved partition of unity-based mesoscopic masonry model | VANDOREN, Bram; DEGEE, Herve | Conference Material | C2 |
| 91 | 2015 | Transfert de force entre profil acier et mur en béton armé | Plumier, André; DRAGAN, Dan; Mengeot, Pierre; DEGEE, Herve; Bogdan, Teodora | Proceedings Paper | C2 |
| 92 | 2015 | Design of steel and composite structures with limited ductility requirements for optimized performances in moderate earthquake areas – the “Meakado” project | DEGEE, Herve; Kanyilmaz, Alper; Castiglioni, Carlo; Mouchaux, Maël; Martin, Pierre-Olivier; Aramburu, Amaia; Calderon, Inigo; Wiesschollek, Matthias; Hoffmeister, Benno | Proceedings Paper | C2 |
| 93 | 2015 | Dimensionnement des structures métalliques et mixtes en vue d’une optimisation de leurs performances en zones de sismicité faible à modérée – le projet Européen Meakado | DEGEE, Herve | Proceedings Paper | C2 |
| 94 | 2015 | A Bond-Slip Modelling Approach for the Transfer Length of Pre-tensioned Concrete | STEENSELS, Rik; Vandewalle, Lucie; DEGEE, Herve | Conference Material | C2 |
| 95 | 2015 | Characterization of the bond properties at the steel-concrete interface in concrete members reinforced by steel profiles | DEGEE, Herve; Bogdan, Teodora; DRAGAN, Dan; Plumier, André | Proceedings Paper | C2 |
| 96 | 2015 | The “Meakado” project: designing steel and composite structures for optimized performances in moderate earthquake areas | DEGEE, Herve; Castiglioni, Carlo; Martin, Pierre-Olivier; Calderon, Inigo; Hoffmeister, Benno | Proceedings Paper | C2 |
| 97 | 2015 | A preliminary assessment of slenderness and overstrength homogeneity criteria used in the design of concentrically braced steel frames in moderate seismicity | Kanyilmaz, Alper; Castiglioni, Carlo; DEGEE, Herve; Martin, Pierre-Olivier | Proceedings Paper | C1 |
| 98 | 2015 | Rocking behaviour of simple unreinforced load-bearing masonry walls including soundproofing rubber layers | MORDANT, Christophe; Denoël, Vincent; DEGEE, Herve | Proceedings Paper | C1 |
| 99 | 2015 | Comparison of experimental results and numerical modelling of unreinforced load-bearing masonry structures subjected to earthquake loading | MORDANT, Christophe; Denoël, Vincent; DEGEE, Herve | Proceedings Paper | C2 |
| 100 | 2015 | Dynamisch gedrag metselwerkconstructies | MORDANT, Christophe; VANDOREN, Bram; DEGEE, Herve | Journal Contribution | A3 |
| 101 | 2015 | Seismic protection of industrial plants - case study of a gas tank | GOUVEIA HENRIQUES, Jose; Salvatore, Walter; DEGEE, Herve | Proceedings Paper | C1 |
| 102 | 2015 | Erratum to “Efficiency of Eurocode 8 design rules for steel and steel–concrete composite structures” [Journal of Constructional Steel Research 112 (2015) 108–129] | Braconi, A.; Caprili, S.; DEGEE, Herve; Guendel, M.; Hjiaj, M.; Hoffmeister, B.; Karamanos, S. A.; Rinaldi, V.; Salvatore, W.; Somja, H. | Journal Contribution | M |
| 103 | 2015 | Efficiency of Eurocode 8 design rules for steel and steel-concrete composite structures | Braconi, A.; Caprili, S.; DEGEE, Herve; Guendel, M.; Hjaij, M.; Hoffmeister, B.; Karamanos, S. A.; Rinaldi, V.; Salvatore, W.; Somja, H. | Journal Contribution | A1 |
| 104 | 2015 | Seismic Behaviour of Thin-Bed Layered Unreinforced Clay Masonry Frames with T- or L-Shaped Piers | MORDANT, Christophe; Dietz, Matthew; Taylor, Colin; DEGEE, Herve | Book Section | B2 |
| 105 | 2014 | 7. Procedure for performance-based seismic design of innovative hybrid-coupled shear walls | ZONA, A.; BOGDAN, T.; MADOUNI, L.; DEGEE, Herve; LEONI, G.; DALL'ASTA, A. | Conference Material | C2 |
| 106 | 2014 | 2. Modelling of steel-concrete shear connection – application to coupled shear walls under seismic action | MADOUNI, L.; BOGDAN, T.; HANNACHI, N.; DEGEE, Herve | Conference Material | C2 |
| 107 | 2014 | 5. Experimental studies on the seismic performances of steel storage racks | BRAHAM, C.; DEGEE, Herve | Conference Material | C2 |
| 108 | 2014 | Static and cyclic experimental study of the out-of-plane bending behaviour of dry and mortar bound masonry walls | BULTOT, E.; DEGEE, Herve; VANPARYS, L. | Conference Material | C2 |
| 109 | 2014 | 3. A proposal for the design of concrete sections reinforced by multiple encased rolled steel sections | BOGDAN, T.; PLUMIER, A.; DEGEE, Herve | Conference Material | C2 |
| 110 | 2014 | Harbiye aqueduct: a record of past earthquakes | LAMAIR, L.; DEGEE, Herve; HUBERT-FERRARI, A. | Conference Material | C2 |
| 111 | 2014 | Design of innovative seismic-resistant steel-concrete hybrid coupled shear walls | ZONA, A.; LEONI, G.; DEGEE, Herve; DALL'ASTA, A. | Conference Material | C2 |
| 112 | 2014 | Numerical investigations of the steel-concrete load transfer mechanisms in earthquake resistant hybrid coupled shear walls | MADOUNI, L.; BOGDAN, T.; DEGEE, Herve | Conference Material | C2 |
| 113 | 2014 | Design of innovative seismic resistant steel-concrete hybrid coupled shear walls | ZONA, A.; LEONI, G.; DEGEE, Herve; DALL'ASTA, A. | Conference Material | C2 |
| 114 | 2014 | Perspectives for EN 1998 evolution regarding steel structures | DEGEE, Herve; LANDOLFO, R. | Conference Material | C2 |
| 115 | 2014 | 6. Shake table tests on unreinforced load-bearing masonry sub-structures | MORDANT, Christophe; DEGEE, Herve | Conference Material | C2 |
| 116 | 2014 | Experimental testing on modern clay masonry structures | VASSEUR, L.; MORDANT, Christophe; DEGEE, Herve | Conference Material | C2 |
| 117 | 2014 | 4. Seismic assessment of masonry buildings from shaking table tests and non linear dynamic simulations by the proper orthogonal decomposition (POD) | CATTARI, S.; Chioccariello, A.; DEGEE, Herve; DONEUX, C.; LAGOMARSINO, S.; MORDANT, Christophe | Conference Material | C2 |
| 118 | 2014 | Influence of the presence of rubber acoustic layers on the strength and stability of clay masonry walls | MORDANT, Christophe; DEGEE, Herve; VASSEUR, L. | Conference Material | C2 |
| 119 | 2014 | 8. Full-scale shaking table tests of two-storey modern thermal insulation clay block masonry buildings including non linear pushover analysis | LU, S.; JÄGER, A.; DEGEE, Herve; MORDANT, Christophe; CHIOCCARIELLO, A.; RAKIZEVIC, Z.; SENDOVA, V.; CANDEIAS, P.; Mendes, L.; CAMPOS COSTA, A.; COELHO, E. | Conference Material | C2 |
| 120 | 2014 | 9. Full-scale testing of modern unreinforced thermal insulation clay block masonry houses | Mendes, L.; CANDEIAS, P.; CORREIA, A.; CAMPOS COSTA, A.; COELHO, E.; JÄGER, A.; LU, S.; DEGEE, Herve; MORDANT, Christophe | Conference Material | C2 |
| 121 | 2014 | Shaking table tests of unreinforced load-bearing masonry structures | MORDANT, Christophe; TAYLOR, C.; DIETZ, M.; VASSEUR, L.; DEGEE, Herve | Conference Material | C2 |
| 122 | 2014 | Steel pallet racks - Experimental characterization of the cross- and down-aisle behaviour | BRAHAM, Catherine; DEGEE, Herve | Conference Material | C2 |
| 123 | 2014 | Seismic performances of modern unreinforced thermal insulation clay blocks masonry houses | DEGEE, Herve; MORDANT, Christophe; CANDEIAS, P.; Mendes, L.; CAMPOS COSTA, A.; COELHO, E.; LU, S.; JÄGER, A. | Proceedings Paper | C1 |
| 124 | 2014 | Shaking table tests on unreinforced load-bearing masonry frames | MORDANT, Christophe; DIETZ, M.; TAYLOR, C.; DEGEE, Herve | Proceedings Paper | C1 |
| 125 | 2014 | A simplified procedure to assess the dynamic pressure on large reservoirs | BULDGEN, L.; DEGEE, Herve; LE SOURNE, H.; RIGO, P. | Proceedings Paper | C1 |
| 126 | 2014 | Characterization of the seismic behavior of steel pallet racks in cross-aisle direction | Braham, Catherine; DEGEE, Herve | Proceedings Paper | C1 |
Loading...
5
0
5
0
false